MKVPROPEDIT(1)

NAME
mkvpropedit - Modify properties of existing Matroska(TM) files without a complete remux

개요

mkvpropedit [options] {source-filename} {actions}

설명

This program analyses an existing Matroska(TM) file and modifies some of its properties. Then it writes those modifications to the existing file. Among the properties that can be changed are the segment information elements (e.g. the title) and the track headers (e.g. the language code, 'default track' flag or the name).

옵션:

-l, --list-property-names
    Lists all known and editable property names, their type (string, integer, boolean etc) and a short description. The program exits afterwards. Therefore the source-filename parameter does not have to be supplied.

-p, --parse-mode mode
    Sets the parse mode. The parameter 'mode' can either be 'fast' (which is also the default) or 'full'. The 'fast' mode does not parse the whole file but uses the meta seek elements for locating the required elements of a source file. In 99% of all cases this is enough. But for files that do not contain meta seek elements or which are damaged the user might have to set the 'full' parse mode. A full scan of a file can take a couple of minutes while a fast scan only takes seconds.

Actions that deal with track and segment info properties:

-e, --edit selector
    Sets the Matroska(TM) file section (segment information or a certain track's headers) that all following add, set and delete actions operate on. This option can be used multiple times in order to make modifications to more than one element.

    By default mkvpropedit(1) will edit the segment information section.

    See the section about edit selectors for a full description of the syntax.

-a, --add name=value
    Adds a property name with the value value. The property will be added even if such a property exists already. Note that most properties are unique and cannot occur more than once.

-s, --set name=value
    Sets all occurrences of the property name to the value value. If no such property exists then it will be added.

-d, --delete name
    Deletes all occurrences of the property name. Note that some properties are required and cannot be deleted.

Actions that deal with tags and chapters:

-t, --tags selector:filename
    Add or replace tags in the file with the ones from filename or remove them if filename is empty. mkvpropedit(1) reads the same XML tag format that mkvmerge(1) reads as well.

    The selector must be one of the words all, global or track. For all mkvpropedit(1) will replace or remove all tags in a file. With global only global tags will be replaced or removed.

    With track mkvpropedit(1) will replace tags for a specific track. Additionally the tags read from filename will be assigned to the same track. The track is specified in the same way edit selectors are specified (see below), e.g. --tags track:a1:new-audio-tags.xml.

--add-track-statistics-tags
    Calculates statistics for all tracks in a file and adds new statistics tags for them. If the file already contains such tags then they'll be updated.

--delete-track-statistics-tags
    Deletes all existing track statistics tags from a file. If the file doesn't contain track statistics tags then it won't be modified.

-c, --chapters filename
    Add or replace chapters in the file with the ones from filename or remove them if filename is empty. mkvpropedit(1) reads the same XML and simple chapter formats that mkvmerge(1) reads as well.

첨부 파일 처리 동작:

--add-attachment filename
    Adds a new attachment from filename.

    If the option --attachment-name has been used prior to this option then its value is used as the new attachment's name. Otherwise it is derived from filename.

    If the option --attachment-mime-type has been used prior to this option then its value is used as the new attachment's MIME type. Otherwise it is auto-detected from the content of filename.

    If the option --attachment-description has been used prior to this option then its value is used as the new attachment's description. Otherwise no description will be set.

    If the option --attachment-uid has been used prior to this option then its value is used as the new attachment's UID. Otherwise a random UID will be generated automatically.

--replace-attachment selector:filename
    Replaces one or more attachments that match selector with the file filename. If more than one existing attachment matches selector then all of their contents will be replaced by the content of filename.

    The selector can have one of four forms. They're exlained below in the section attachment selectors.

    If the option --attachment-name has been used prior to this option then its value is set as the new name for each modified attachment. Otherwise the names aren't changed.

    If the option --attachment-mime-type has been used prior to this option then its value is set as the new MIME type for each modified attachment. Otherwise the MIME types aren't changed.

    If the option --attachment-description has been used prior to this option then its value is set as the new description for each modified attachment. Otherwise the descriptions aren't changed.

    If the option --attachment-uid has been used prior to this option then its value is set as the new UID for each modified attachment. Otherwise the UIDs aren't changed.

--update-attachment selector
    Sets the properties of one or more attachments that match selector. If more than one existing attachment matches selector then all of their properties will be updated.

    The selector can have one of four forms. They're exlained below in the section attachment selectors.

    If the option --attachment-name has been used prior to this option then its value is set as the new name for each modified attachment. Otherwise the names aren't changed.

    If the option --attachment-mime-type has been used prior to this option then its value is set as the new MIME type for each modified attachment. Otherwise the MIME types aren't changed.

    If the option --attachment-description has been used prior to this option then its value is set as the new description for each modified attachment. Otherwise the descriptions aren't changed.

    If the option --attachment-uid has been used prior to this option then its value is set as the new UID for each modified attachment. Otherwise the UIDs aren't changed.

--delete-attachment selector
    Deletes one or more attachments that match selector.

    The selector can have one of four forms. They're exlained below in the section attachment selectors.

Options for attachment actions:

--attachment-name name
    Sets the name to use for the following --add-attachment or --replace-attachment operation.

--attachment-mime-type mime-type
    Sets the MIME type to use for the following --add-attachment or --replace-attachment operation.

--attachment-description description
    Sets the description to use for the following --add-attachment or --replace-attachment operation.

다른 옵션:

--command-line-charset 문자셋
    명령행에 주어진 문자열을 변환할 문자셋을 정합니다. 기본값은 현재 시스템 로케일에 따른 문자셋입니다.

--output-charset 문자셋
    출력할 문자열을 변환할 문자셋을 정합니다. 기본값은 현재 시스템 로케일에 따른 문자셋입니다.

-r, --redirect-output 파일명
    Writes all messages to the file file-name instead of to the console. While this can be done easily with output redirection there are cases in which this option is needed: when the terminal reinterprets the output before writing it to a file. The character set set with --output-charset is honored.

--ui-language 코드
    언어 코드의 번역을 강제로 사용합니다 (예: 강제 사용할 독일어 번역 코드는 'de_DE'). 'list'를 코드로 입력하면 mkvextract(1) 에서 이용 가능한 번역 목록을 출력할 것입니다.

--debug 토픽
    특정 기능에 대해 디버깅을 켭니다. 이 기능은 개발자에게만 유용합니다.

--engage 기능
    Turn on experimental features. A list of available features can be requested with mkvpropedit --engage list. These features are not meant to be used in normal situations.

--gui-mode
    GUI 모드를 켭니다. 이 모드에서는 GUI 동작시 무슨 일이 일어나는지 알려줄 수 있는 특별하게 형식화된 줄을 출력할 것입니다. 이 메시지들은 '#GUI#message' 형식을 따릅니다. 이 메시지 뒤에 '#GUI#message#key1=value1#key2=value2...' 형태의 키/값 쌍이 붙을 수 있습니다. 메시지나 키값들은 결코 번역되지 않고 항상 영어로 출력됩니다.

-v, --verbose
    읽어들인 모든 중요한 Matroska(TM) 요소를 자세하게 보여 줍니다.

-h, --help
    사용법에 관한 정보를 표시하고 종료합니다.

-V, --version
    버전 정보를 표시하고 종료합니다.

--check-for-updates
    http://mkvtoolnix-releases.bunkus.org/latest-release.xml URL을 다운로드하여 새로운 버전이 나왔는지 온라인에서 확인합니다. key=value 스타일의 네 줄이 출력될 것입니다: 정보를 검색하는 주소 (key version_check_url), 현재 실행 중인 버전 (key running_version), 가장 최근에 나온 버전 (key available_version), 다운로드 URL (key download_url).

    이후에 프로그램은 이용 가능한 새 버전이 없으면 0, 새 버전이 있으면 1, 오류 발생시(업데이트 정보를 가져올 수 없는 경우)는 2의 종료 코드를 가지고 있습니다.

    이 옵션은 libcurl을 지원하도록 프로그램을 만든 경우에만 이용 가능합니다.

@옵션 파일
    options-file 파일에서 추가적인 명령행 인수를 읽습니다. 공백이 아닌 첫번째 문자가 해쉬 표시('#')인 줄은 주석으로 간주하여 무시합니다. 줄의 앞과 끝의 공백은 제거될 것입니다. 각 줄에는 반드시 한 개의 옵션을 포함해야 합니다.

    Several chars can be escaped, e.g. if you need to start a non-comment line with '#'. The rules are described in the section about escaping text.

    The command line 'mkvpropedit source.mkv --edit track:a2 --set name=Comments' could be converted into the following option file:

        # Modify source.mkv
        source.mkv
        # Edit the second audio track
        --edit
        track:a2
        # and set the title to 'Comments'
        --set
        name=Comments

선택기 편집

The --edit option sets the Matroska(TM) file section (segment information or a certain track's headers) that all following add, set and delete actions operate on. This stays valid until the next --edit option is found. The argument to this option is called the edit selector.

By default mkvpropedit(1) will edit the segment information section.

  세그먼트 정보

The segment information can be selected with one of these three words: 'info', 'segment_info' or 'segmentinfo'. It contains properties like the segment title or the segment UID.

  트랙 헤더

Track headers can be selected with a slightly more complex selector. All variations start with 'track:'. The track header properties include elements like the language code, 'default track' flag or the track's name.

track:n
    If the parameter n is a number then the nth track will be selected. The track order is the same that mkvmerge(1)'s --identify option outputs.

    Numbering starts at 1.

track:tn
    If the parameter starts with a single character t followed by a n then the nth track of a specific track type will be selected. The track type parameter t must be one of these four characters: 'a' for an audio track, 'b' for a button track, 's' for a subtitle track and 'v' for a video track. The track order is the same that mkvmerge(1)'s --identify option outputs.

    Numbering starts at 1.

track:=uid
    If the parameter starts with a '=' followed by a number uid then the track whose track UID element equals this uid. Track UIDs can be obtained with mkvinfo(1).

track:@number
    If the parameter starts with a '@' followed by a number number then the track whose track number element equals this number. Track number can be obtained with mkvinfo(1).

  주의

Due to the nature of the track edit selectors it is possible that several selectors actually match the same track headers. In such cases all actions for those edit selectors will be combined and executed in the order in which they're given on the command line.

첨부 파일 선택기

An attachment selector is used with the two actions --replace-attachment and --delete-attachment. It can have one of the following four forms:

    1. Selection by attachment ID. In this form the selector is simply a number, the attachment's ID as output by mkvmerge(1)'s identification command.

    2. Selection by attachment UID (unique ID). In this form the selector is the equal sign = followed by a number, the attachment's unique ID as output by mkvmerge(1)'s verbose identification command.

    3. Selection by attachment name. In this form the selector is the literal word name: followed by the existing attachment's name. If this selector is used with --replace-attachment then colons within the name to match must be escaped as \c.

    4. Selection by MIME type. In this form the selector is the literal word mime-type: followed by the existing attachment's MIME type. If this selector is used with --replace-attachment then colons within the MIME type to match must be escaped as \c.

예

The following example edits a file called 'movie.mkv'. It sets the segment title and modifies the language code of an audio and a subtitle track. Note that this example can be shortened by leaving out the first --edit option because editing the segment information element is the default for all options found before the first --edit option anyway.

    $ mkvpropedit movie.mkv --edit info --set "title=The movie" --edit track:a1 --set language=fre --edit track:a2 --set language=ita

The second example removes the 'default track flag' from the first subtitle track and sets it for the second one. Note that mkvpropedit(1), unlike mkvmerge(1), does not set the 'default track flag' of other tracks to '0' if it is set to '1' for a different track automatically.

    $ mkvpropedit movie.mkv --edit track:s1 --set flag-default=0 --edit track:s2 --set flag-default=1

Replacing the tags for the second subtitle track in a file looks like this:

    $ mkvpropedit movie.mkv --tags track:s2:new-subtitle-tags.xml

Removing all tags requires leaving out the file name:

    $ mkvpropedit movie.mkv --tags all:

Replacing the chapters in a file looks like this:

    $ mkvpropedit movie.mkv --chapters new-chapters.xml

Removing all chapters requires leaving out the file name:

    $ mkvpropedit movie.mkv --chapters ''

Adding a font file (Arial.ttf) as an attachment:

    $ mkvpropedit movie.mkv --add-attachment Arial.ttf

Adding a font file (89719823.ttf) as an attachment and providing some information as it really is just Arial:

    $ mkvpropedit movie.mkv --attachment-name Arial.ttf --attachment-description 'The Arial font as a TrueType font' --attachment-mime-type application/x-truetype-font --add-attachment 89719823.ttf

Replacing one attached font (Comic.ttf) file with another one (Arial.ttf):

    $ mkvpropedit movie.mkv --attachment-name Arial.ttf --attachment-description 'The Arial font as a TrueType font' --replace-attachment name:Comic.ttf:Arial.ttf

Deleting the second attached file, whatever it may be:

    $ mkvpropedit movie.mkv --delete-attachment 2

Deleting all attached fonts by MIME type:

    $ mkvpropedit movie.mkv --delete-attachment mime-type:application/x-truetype-font

종료 코드

mkvpropedit(1) exits with one of three exit codes:

    • 0 -- This exit codes means that the modification has completed successfully.

    • 1 -- In this case mkvpropedit(1) has output at least one warning, but the modification did continue. A warning is prefixed with the text 'Warning:'. Depending on the issues involved the resulting files might be ok or not. The user is urged to check both the warning and the resulting files.

    • 2 -- This exit code is used after an error occurred. mkvpropedit(1) aborts right after outputting the error message. Error messages range from wrong command line arguments over read/write errors to broken files.

TEXT FILES AND CHARACTER SET CONVERSIONS

For an in-depth discussion about how all tools in the MKVToolNix suite handle character set conversions, input/output encoding, command line encoding and console encoding please see the identically-named section in the mkvmerge(1) man page.

ESCAPING SPECIAL CHARS IN TEXT

There are a few places in which special characters in text must or should be escaped. The rules for escaping are simple: each character that needs escaping is replaced with a backslash followed by another character.

The rules are: ' ' (a space) becomes '\s', '"' (double quotes) becomes '\2', ':' becomes '\c', '#' becomes '\h' and '\' (a single backslash) itself becomes '\\'.

ENVIRONMENT VARIABLES

mkvpropedit(1) uses the default variables that determine the system's locale (e.g. LANG and the LC_* family). Additional variables:

MKVPROPEDIT_DEBUG, MKVTOOLNIX_DEBUG 와 그 간략한 형태인MTX_DEBUG
    The content is treated as if it had been passed via the --debug option.

MKVPROPEDIT_ENGAGE, MKVTOOLNIX_ENGAGE 와 그 간략한 형태인 MTX_ENGAGE
    The content is treated as if it had been passed via the --engage option.

MKVPROPEDIT_OPTIONS, MKVTOOLNIX_OPTIONS 와 그 간략한 형태인 MTX_OPTIONS
    The content is split on white space. The resulting partial strings are treated as if it had been passed as command line options. If you need to pass special characters (e.g. spaces) then you have to escape them (see the section about escaping special characters in text).

더 보기

mkvmerge(1), mkvinfo(1), mkvextract(1), mkvtoolnix-gui(1)

WWW

The latest version can always be found at the MKVToolNix homepage[1].

AUTHOR

Moritz Bunkus <moritz@bunkus.org>
    개발자

NOTES

1.  the MKVToolNix homepage
    https://mkvtoolnix.download/